Latest project – a home made electric spinning wheel

I enjoy spinning, but with various back problems and not enough space in the lounge room for my spinning wheel I don’t get to spin much, other than at craft group twice a month.  So recently I started looking into electric spinning wheels.  There are some really lovely ones out there but the price range of $800 or more was just too steep for me to even consider.  However, after looking in a local second hand store at what was obviously an old home made electric spinner that was still out of my price range, I started to wonder if it might be worth my while to try and make my own.

So last Saturday I made a start.  I actually already had a spare flyer (the part that spins around and puts the thread onto the bobbin) which was a major head start.  I made a wooden frame to hold the flyer and pulled a 12V fan motor out of one of our wrecking cars (Kim’s suggestion) and mounted it underneath to do the spinning via a drive belt.  Then I rigged up a bobbin brake and tried out various things as drive belts on it.  I was using a battery charger to power it at first, but it was going too slow so then I tried it with 4 x 3.4V Li-ion batteries hooked up in series which went much better.  No sooner did I get it going than I dropped it and broke my flyer!  Kim assures me it should glue back together okay though.

SONY DSC

Anyway, it is a work in progress!  I found a good sized rubber drive belt which was going nicely for a few tries, but that also broke – it was pretty old – but it might take a bit to find a good replacement.  I’ve ordered a battery holder and probably should mount my motor a bit better too, also a better adjustment for my bobbin brake than a piece of chain would be good, and I need to work out an easier way to get the flyer in and out.  All of which just goes to show there are a lot of adjustments and improvements to make, but it does actually work and I did get to spin a bit.  🙂

11th April 2015

Time for an update on the Spinner!

I’m pleased to say I have made some of the necessary improvements on my spinner.  The battery holder arrived and is mounted under the base with 4 nice new batteries.  Kim gave me a hand to wire it all together nicely and I installed an on/off toggle switch (which came out of the tractor which Kim is in the process of rewiring the ignition of) so I no longer need to use alligator clips to make it go, though I do still use them to make it run backwards to ply the wool I have spun.

ElectricSpinnerWorks

A friend had some drive belt cord that he fitted for me, and he also helped me to make some improvements to stabilise the motor mounting and the uprights.  We also glued the flyer back together and it seems to be holding well so far.  Then this morning I put on a machine head that I took from a broken guitar which I am using to adjust the bobbin brake, and which is a great improvement on the old piece of chain.

ElectricSpinnerImproved

It runs well and I am very pleased with it.  If possible I hope to get some bearings for the ends of the flyer to make it run a little quieter and a quicker and easier way to remove the bobbin would be nice, but in the meantime I am enjoying using it.

We took a little bit of video of it running the other day which I have included below.  It was before the most recent improvements but still shows it in action.  🙂

Advertisements

3 Responses to “Latest project – a home made electric spinning wheel”

  1. meditativeknitter Says:

    Reblogged this on knit1breathe1 and commented:
    Inspiration for upgrades to my own homemade electric spinner.

    • milkenunny Says:

      Hi. I hope you get your own homemade e-spinner going well.
      I mostly use a car battery charger to run mine these days rather than the batteries, so I don’t have to worry about recharging. The car fan motor works really well for me. I haven’t used it for a few weeks now, but your posting has inspired me to get it back out and do some more spinning!
      Cathy

      • meditativeknitter Says:

        I did get it going Cathy, thank you! We pulled the motor and power socket out of an old sewing machine. I’ve been using the spinner for 3 and a half days now and it’s fantastic! We even replaced the foot control – hubby took it off the cord and put a light dimmer switch in its place. There is always room for improvement but I’m so happy with it as it is! 🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: